How Bicycle Radar Helps Cyclists Monitor Traffic Behind Them
Every ride should be a journey, not a gamble. Traffic approaching from behind is one of the challenges cyclists face on the road. Bicycle radar helps riders detect approaching vehicles, monitor rear traffic, and improve situational awareness. Learn how TeraSilIC's 24GHz FMCW radar technology, radar ICs, bike radar modules, and Rear Collision Warning (RCW) algorithms support safer cycling, smarter eBike safety systems, and next-generation bicycle radar solutions for OEM manufacturers.
Dr. Shih-An Yu
11/5/20266 分钟阅读


Bicycle Radar: Understanding the Risks of Traffic Approaching from Behind
How road safety research and 24GHz FMCW radar technology are shaping the next generation of bicycle safety systems.
Cyclists are accustomed to watching the road ahead. Traffic approaching from behind, however, is harder to monitor. A rider may hear an approaching vehicle without knowing its distance, closing speed, or whether the driver intends to overtake.
A shoulder check provides useful information, but it also requires briefly looking away from the road ahead.
This limitation has contributed to growing interest in bicycle radar technology, particularly systems designed to detect and track vehicles approaching from behind.
Recent European road safety research provides a clearer picture of why rear traffic awareness matters.
1. Cyclist Safety Is Improving More Slowly Than Other Road Safety
According to the European Transport Safety Council (ETSC), 1,926 cyclists were killed on European Union roads in 2024.
Its April 2026 report, Improving the Safety of Cycling in Europe, found that cyclist fatalities declined by just 8% between 2014 and 2024. Over the same period, deaths among motorized road users decreased at an average annual rate four times faster.
The report also identified a major concern: 65% of cyclist fatalities in the EU involved collisions with motor vehicles.
Passenger cars accounted for 44% of all cyclist deaths, while heavy goods vehicles and vans accounted for another 9% and 7%, respectively.
These statistics do not indicate that every fatal collision could be addressed by bicycle radar. They do, however, highlight the importance of improving how cyclists and motor vehicles interact on shared roads.
ETSC emphasizes speed management, safer cycling infrastructure, and improvements in vehicle safety as essential priorities.
Source: ETSC, Improving the Safety of Cycling in Europe, April 2026
2. What Research Reveals About Overtaking and Rear-End Crashes
Vehicle overtaking is a familiar part of road cycling, but the available space between vehicles and cyclists can vary considerably.
A 2019 study published in Accident Analysis & Prevention, titled How Much Space Do Drivers Provide When Passing Cyclists?, examined the influence of vehicles and road infrastructure on passing distance.
The researchers found that approximately one in every 17 passing events involved less than one meter of lateral clearance.
The study also identified on-road bicycle lanes and parked vehicles as factors associated with reduced passing distance.
Rear-end collisions present another concern.
A study published in PLOS ONE in 2024 analyzed 127,637 bicycle crash records from the United Kingdom, covering the period from 1991 to 2020.
The dataset included:
Crash classificationNumber of recorded crashesOvertaking crashes18,350Rear-end crashes44,962Door-related crashes6,363Other crashes57,962
The study found that unlit darkness was associated with higher odds of rear-end crashes relative to other crash types, with an adjusted odds ratio of 1.49 (95% CI: 1.40–1.57).
The researchers also identified rural road conditions and certain late-night periods as important factors.
These findings describe associations within recorded casualty crashes rather than the overall probability of a cyclist being involved in a collision.
They nevertheless underline the challenges involved in sharing the road with approaching traffic.
3. How Quickly Can a Vehicle Approach a Cyclist?
Consider a vehicle approaching a cyclist from behind at a relative closing speed of 60 km/h.
At that constant speed, the distance between the vehicle and cyclist decreases by approximately 16.7 meters every second.
Initial distanceTime to reach the cyclist's position150 m9.0 seconds100 m6.0 seconds60 m3.6 seconds30 m1.8 seconds
These values are based on a simplified constant-speed calculation. They are not collision predictions, because drivers may brake, change lanes, or overtake safely.
The calculation illustrates how quickly the available distance changes.
For a cyclist who cannot continuously monitor rear traffic, knowing that a vehicle is approaching—and how quickly—provides additional situational information.
This is one of the primary functions of a bicycle rear radar system.
4. How 24GHz FMCW Radar Detects Approaching Vehicles
Frequency-Modulated Continuous-Wave (FMCW) radar uses transmitted radio signals that change frequency over time.
By processing reflected signals, an FMCW radar system can estimate a target's distance and relative radial velocity.
For bicycle applications, a 24GHz FMCW radar can be integrated into a compact sensing module to monitor approaching vehicles.
A useful example is the relationship between radar bandwidth and range resolution.
With approximately 200 MHz of frequency sweep bandwidth, the theoretical range resolution is:
Range Resolution = c / (2 × Bandwidth) ≈ 0.75 meters
This calculation describes the theoretical ability to separate targets at different distances. It does not represent maximum detection distance or guarantee measurement accuracy.
Infineon's technical documentation confirms a theoretical range resolution of approximately 0.75 meters for a 200 MHz FMCW radar configuration, while also noting that effective resolution depends on target characteristics.
Source: Infineon, XENSIV BGT24LTR11N16 Radar FAQ
For bicycle radar applications, range resolution is only one part of system performance.
A practical radar solution must also consider antenna coverage, received signal quality, processing algorithms, power consumption, and vehicle tracking reliability.
5. Detection Range Is Only Part of Bicycle Radar Performance
Commercial bicycle radar products demonstrate how rear traffic sensing can be used in everyday cycling.
For example, Garmin's Varia RTL515 documentation specifies detection of approaching vehicles at distances up to 140 meters, with support for detecting up to eight approaching vehicles.
This demonstrates the established application of radar-based rear traffic monitoring in commercial cycling products.
Source: Garmin Varia RTL515 Owner's Manual
However, maximum detection distance alone does not fully describe radar performance.
A system operating on a busy road may need to process returns from multiple vehicles while filtering unwanted detections from roadside objects and other sources.
For Rear Collision Warning (RCW) and bicycle traffic awareness applications, several capabilities are important:
Vehicle detection: Detecting relevant approaching vehicles within the radar's coverage area.
Distance and relative speed estimation: Measuring how vehicle positions change relative to the cyclist.
Multi-target tracking: Maintaining tracks for multiple vehicles over consecutive measurements.
False alarm reduction: Reducing alerts caused by irrelevant or inconsistent detections.
Warning timing: Delivering useful information without unnecessarily distracting the rider.
These functions require coordinated development across radar hardware, antenna design, signal processing, and tracking algorithms.
For bicycle and eBike manufacturers, this creates opportunities to differentiate products through sensing performance, physical size, power consumption, and system integration.
6. Integrating Bicycle Radar into eBike Safety Systems
As bicycle electronics become more connected, radar sensing can be incorporated into different product architectures.
A bicycle radar module may operate as part of an integrated radar tail light, an eBike display system, or a broader connected safety platform.
Different applications involve different engineering requirements.
A road bicycle product may prioritize low power consumption and compact dimensions. An eBike platform may place greater emphasis on communication with existing displays and electronic control systems.
Future architectures combining multiple transmit and receive antennas may support more detailed target-position measurements. Integrating radar with cameras through radar and vision sensor fusion may provide additional information about traffic conditions.
These advanced functions depend on sensor configuration, algorithm design, processing capability, and real-world validation.
For OEM development, selecting the appropriate radar architecture is as important as the individual sensor specifications.
7. TeraSilIC: Radar Technology for Bicycle and eBike OEM Applications
TeraSilIC develops radar semiconductor technology and sensing solutions for bicycle and eBike applications.
Our development capabilities cover the key elements needed to build radar-enabled products:
24GHz Radar ICs and FMCW Radar Technology
Radar Front-End Modules (FEM)
Bicycle Radar Modules and Antenna Design
Radar Signal Processing and Vehicle Tracking Algorithms
Rear Collision Warning (RCW) Development
Radar Integration for Bicycle and eBike OEM Platforms
Working across these components allows us to support different product requirements, from compact rear-traffic detection systems to more advanced sensing architectures.
Our development focus is not limited to extending detection range. Consistent vehicle tracking, practical warning logic, compact integration, and low-power operation also matter in real cycling environments.
For bicycle brands, eBike manufacturers, and system developers, these technologies offer building blocks for new products designed around specific riding applications.
8. Improving Awareness, Not Replacing Road Safety
Bicycle radar does not eliminate the risks of cycling. It cannot guarantee that a collision will be prevented, and it does not replace safe infrastructure, responsible driving, or rider attention.
What it can provide is additional information about vehicles approaching from behind.
Road safety research helps identify where risks occur. Radar technology offers a way to monitor certain aspects of surrounding traffic. The challenge for manufacturers is turning these measurements into reliable, useful information for riders.
At TeraSilIC, we continue to develop radar ICs, modules, and detection algorithms to support that goal.
Every ride should be a journey, not a gamble.
Explore Bicycle Radar Solutions with TeraSilIC
Developing a new bicycle radar product, eBike safety system, or connected mobility platform?
TeraSilIC supports OEMs and technology partners with 24GHz FMCW radar ICs, radar front-end modules, and vehicle detection algorithms.
Contact sales@terasilic.com to discuss your radar integration requirements.
Visit www.terasilic.com to explore our radar technologies.
References
European Transport Safety Council (ETSC). (2026). Improving the Safety of Cycling in Europe, PIN Flash 50. Official Report
How Much Space Do Drivers Provide When Passing Cyclists? Understanding the Impact of Motor Vehicle and Infrastructure Characteristics on Passing Distance. (2019). Accident Analysis & Prevention. PubMed
Risk Factors for Overtaking, Rear-End, and Door Crashes Involving Bicycles in the United Kingdom: Revisited and Reanalysed. (2024). PLOS ONE. Full Research Paper
Infineon Technologies. XENSIV BGT24LTR11N16 Radar FAQ. Technical Reference
Garmin. Varia RTL515 Owner's Manual — Radar Detection. Product Documentation
Research statistics describe specific populations, periods, and datasets. Detection capability and theoretical radar performance should not be interpreted as evidence of guaranteed collision prevention.

